- 地址：
- 安國市南陽工業區
- 郵箱：
- 415130881@qq.com
- 電話：
- 18631165157
- 傳真：
- 0312-3427286
- 手機：
- 18631165157
渣漿泵的幾種常用結構單級雙吸離心泵
如圖2-14所示，這種結構泵使用也很廣泛，它實際相當于將兩個相同的葉輪背靠背地裝在一根軸上并聯工作，所以這種泵不但流量大，而且可以自動平衡軸向力。單級雙吸泵一般采用半螺旋形吸入室，泵體為蝸殼式壓水空并水平中開式。軸承裝在泵軸的兩端，小型泵采用滾動軸承，大型泵采用滑動軸承。這種泵工作平穩可靠，維修方便，只要打開泵蓋即可將整個轉子取出，可不動進出管路及電機。渣漿泵廠家
Two, several commonly used structure of centrifugal pump single-stage double suction centrifugal pump
As shown in Figure 2-14, this kind of structural pump is also widely used. It is actually equivalent to installing two identical impellers back-to-back on a shaft to work in parallel, so this kind of pump not only has large flow, but also can automatically balance the axial force. The single-stage double suction pump generally adopts a half spiral suction chamber, and the pump body is a volute type pressurized water air and horizontally split type. The bearing is installed at both ends of the pump shaft, the small pump adopts rolling bearing, and the large pump adopts sliding bearing. The pump works stably and reliably, and is easy to maintain. As long as the pump cover is opened, the whole rotor can be taken out without moving the inlet and outlet pipelines and motors.
