- 地址：
- 安國市南陽工業區
- 郵箱：
- 415130881@qq.com
- 電話：
- 18631165157
- 傳真：
- 0312-3427286
- 手機：
- 18631165157
渣漿泵和壓縮機的分類
流體機械是指在流體具有的能量和機械所做的功之間進行轉化的機械設備。流體機械分為兩大類:一種是利用流體的能量對機械做功，從而提供動力(例如，水輪機利用水能，汽輪機利用蒸汽的能量，帶動發電機發電;燃?xì)廨啓C(jī)與噴氣發動機利用燃?xì)獾哪芰刻峁﹦恿?/span>)，也稱為流體動力機械。另一種是通過流體機械把原動機的能量傳給流體，使流體的能量提高，主要包括泵、壓縮機等。
泵和壓縮機是將原動機所做的功轉換成被輸送流體壓力能和動能的流體機械，其中輸送液體介質并提高其能頭的機械稱為泵:輸送氣體介質并提高其能頭的機械按輸出壓力的大小又可分為通風機(全壓小于11. 375kPRa)、數風機(全壓為11.375~241.600kPa)和壓縮機(全壓大于241.600kPa)。通常所說的流體機械包括泵、壓縮機、水輪機和蒸汽輪機等，而不包括從流體所帶的化學能中獲取機械能的內燃機和由流體膨脹過程中熱能轉換為機械能的燃?xì)廨啓C(jī)等。本書主要介紹流體機械中的泵和壓縮機。
泵和壓縮機的用途十分廣泛。幾乎遍及工業、農業各個生產領域，如礦山、冶金、機械、石油化工、國防、交通和農田灌溉等，所以泵和壓縮機又是通用機械。在石油化工生產中,其原料、半成品和成品大多是流體, 因此泵和壓縮機在生產中占有更重要的地位。
泵和壓縮機種類繁多，按其作用原理可分為兩大類如圖0-1與圖0- 2所示。
容積式是依靠工作容積的周期性變化來實現流體的增壓和輸送的。其中,活塞式是依靠活塞在氣缸內做往復運動而實現工作容積的周期性變化，例如往復式泵和活塞式壓縮機;隔膜式屬于液壓驅動,利用膜片來代替活塞的作用;回轉式是借助于轉子在缸內作回轉運動來實現工作容積的周期性變化，例如滑片泵和滑片壓縮機、螺桿泵和螺桿壓縮機，以及齒輪泵等。
葉片式是依靠旋轉的工作葉輪將機械能傳遞給流體介質并轉化成流體的能頭。根據介質在葉輪內的流動方向，主要分為離心式和軸流式，如離心泵、離心壓縮機以及軸流泵和軸流壓縮機等均屬此類。
噴射式也可認為屬于速度式，但它沒有葉輪，依靠種介質的能量來輸送另一種流體介質，如射流泵等。
這些機器各有其特點,適用于不同的生產條件。目前常用泵和壓縮機的適用范圍可參考
圖0-3和圖0-4。渣漿泵廠家
就泵來說,由于離心泵具有結構簡單、體積小、重量輕、操作平穩、流量穩定、性能參數范圍廣、易于制造、便于維修等優點,在油氣儲運工程中得到廣泛應用。在壓縮機方面，活塞壓縮機由于其能耗低、適應性強和靈活性大,目前應用仍最普遍。本書重點講述離心泵、離心壓縮機和活塞壓縮機的基本原理，對其他型式泵和壓縮機只做簡略介紹。
Classification of slurry pumps and compressors
Fluid machinery refers to the mechanical equipment which transforms the energy of fluid and the work done by machinery. Fluid machinery is divided into two categories: one is to use the energy of the fluid to work on the machinery, so as to provide power (for example, water turbine uses the energy of water, steam turbine uses the energy of steam to drive the generator to generate electricity; gas turbine and jet engine use the energy of gas to provide power), also known as fluid power machinery. The other is to transfer the energy of the prime mover to the fluid through the fluid machinery, so as to improve the energy of the fluid, mainly including pumps, compressors, etc.
Pumps and compressors are fluid machines that convert the work done by the prime mover into the pressure energy and kinetic energy of the fluid being transported. The machines that transport the liquid medium and improve its energy head are called pumps. The machines that transport the gas medium and improve its energy head can be divided into fans (total pressure is less than 11.375kpra), fans (total pressure is 11.375-241.600kpa) and compressors (total pressure is more than 241.60) according to the output pressure 0kPa). Generally speaking, fluid machinery includes pumps, compressors, water turbines and steam turbines, etc., excluding the internal combustion engines that obtain mechanical energy from the chemical energy carried by the fluid and the gas turbines that convert heat energy into mechanical energy in the process of fluid expansion. This book mainly introduces pumps and compressors in fluid machinery.
Pumps and compressors are widely used. Almost all over the industrial and agricultural production fields, such as mining, metallurgy, machinery, petrochemical industry, national defense, transportation and farmland irrigation, so pumps and compressors are general machinery. In petrochemical production, the raw materials, semi-finished products and finished products are mostly fluids, so pumps and compressors play a more important role in the production.
There are many kinds of pumps and compressors. According to their working principle, they can be divided into two categories as shown in Figure 0-1 and figure 0-2.
Volume type relies on the periodic change of working volume to realize the pressurization and transportation of fluid. Among them, the piston type relies on the reciprocating motion of the piston in the cylinder to realize the periodic change of the working volume, such as reciprocating pump and piston compressor; the diaphragm type belongs to the hydraulic drive, which uses the diaphragm to replace the role of the piston; the rotary type relies on the rotary motion of the rotor in the cylinder to achieve the periodic change of the working volume, such as the sliding vane pump and the sliding vane compressor, the screw pump and the screw Rod compressor, gear pump, etc.
Vane type is a kind of energy head which transfers mechanical energy to fluid medium and transforms it into fluid by rotating working impeller. According to the flow direction of medium in impeller, it is mainly divided into centrifugal and axial flow, such as centrifugal pump, centrifugal compressor, axial pump and axial compressor.
Jet type can also be considered as velocity type, but it has no impeller, and depends on the energy of one medium to transport another fluid medium, such as jet pump.
These machines have their own characteristics and are suitable for different production conditions. At present, the applicable scope of commonly used pumps and compressors can be referred to
Figure 0-3 and figure 0-4. Slurry pump manufacturer
As far as pumps are concerned, centrifugal pumps are widely used in oil and gas storage and transportation engineering due to their advantages of simple structure, small volume, light weight, stable operation, stable flow, wide range of performance parameters, easy manufacture and maintenance. In the aspect of compressor, piston compressor is still the most popular because of its low energy consumption, strong adaptability and flexibility. This book focuses on the basic principles of centrifugal pumps, centrifugal compressors and piston compressors, and only briefly introduces other types of pumps and compressors.
